Skip to content
Yado
Preview Features Price FAQ Blog
English
English 简体中文 繁體中文 Deutsch Français Español Italiano

Blog

How to record your iPhone screen on a Mac, with QuickTime or Yado

Your iPhone · October 31, 2026 · 8 min read

To record an iPhone screen on a Mac, connect the phone with a cable, open QuickTime Player, choose File, New Movie Recording, and pick the iPhone under Camera. That works with nothing to install. If you would rather not touch QuickTime, the iPhone can record its own screen from Control Center and keep the clip in Photos, and Yado's Record Screen writes the same kind of movie straight to the Desktop with one menu click. All the Mac-side routes need the cable.

Start with QuickTime Player

Apple's QuickTime Player guide for recording a movie lists the steps. Connect the iPhone, open QuickTime Player, choose File, New Movie Recording, click the arrow beside the record button, and choose the connected iPhone under Camera. The window then shows the phone's screen live. Click the record button to start and again to stop, then choose File, Save to name the movie.

The same menu has a Quality setting. Apple says High records H.264 video with 44100 Hz AAC audio and Maximum records H.264 video with Linear PCM audio. It also has a Microphone choice, which matters if your Mac has more than one input.

Apple's page does not mention a trust prompt, but a phone that does not trust the Mac has nothing to share. If the iPhone is missing from the Camera list, unlock it, accept any trust prompt and check the cable first, and iPhone not showing up on Mac goes through the rest.

QuickTime is the right answer when you want to watch the screen on the Mac while you record, for a live demo or a walkthrough you narrate.

The phone can record itself

The iPhone has its own recorder. Apple's Take a screen recording page has the steps: open Control Center, tap the Screen Recording control (add it to Control Center first if it is missing) and wait for the 3-second countdown. To stop, tap the red circle in the Dynamic Island, or on other models the red timer at the top left, then tap Stop. Touch and hold the control before starting to turn on the microphone. The clip is saved to your photo library, under Collections, Media Types, Screen Recordings in Photos.

This route needs no cable and no Mac, so it is the simplest when you are away from your desk. The cost is on the other side: the clip sits in Photos, so getting it to the Mac means AirDrop, iCloud Photos or an export, and a long one takes phone storage until you move it. Transfer photos from iPhone to Mac covers the options.

How the Mac sees the iPhone's screen

When QuickTime lists your iPhone under Camera, it is not using AirPlay and it is not using the Wi-Fi network. macOS exposes a cabled iPhone as a capture device through CoreMediaIO, the framework behind cameras and screen capture devices. A Mac app has to allow screen capture devices once, and after that the phone shows up in AVFoundation's device list as a muxed device, meaning one that carries video and audio together.

Because the phone is a capture device, macOS treats it like a camera. The first time an app reads it, you get the Camera permission prompt, and the setting lives in System Settings, Privacy & Security, Camera. It also explains why the cable matters. The device exists only over USB, which is why a phone connected over Wi-Fi never appears in the Camera list, however well Finder or Yado sees it otherwise. The Wi-Fi guide explains what a wireless connection can and cannot do.

Record with Yado

Yado reads the same capture device, so it works under the same conditions: a cable, an unlocked phone, and Camera access for Yado. It has no live preview. It records a movie for you to keep or send, and it does not show the screen as it goes. If you want to use the phone from the Mac rather than record it, that is macOS's own iPhone Mirroring.

Connect the iPhone by cable, unlock it, and start from either of two places.

  1. Click the Yado logo at the left of the tab bar and choose Record Screen.
  2. In the Mac menu bar, open the iPhone menu and choose Record Screen.

Neither has a keyboard shortcut. Both rows are missing or dimmed while the phone is on Wi-Fi, because there is no screen device to open.

A card then reads Recording the screen and says to stop it from the menu when done. The same row now reads Stop Recording, in the logo menu and the iPhone menu alike, and that is the only stop control, so remember where you started it. When you stop, a card reads Recording saved and shows the file's path.

The movie goes to the Desktop as <phone name> Recording 2026-10-31 09.41.00.mov, with the time to the second. If a file with that name already exists, Yado adds 2, 3 and so on instead of replacing it. A slash in the phone's name becomes a hyphen so the name stays valid. The Chinese interface names the file <phone name> 录屏 <date>.mov.

Yado does not offer a quality menu or a microphone choice. The movie is whatever the capture device delivers, written by AVFoundation's movie file output as a .mov. Because the device is muxed, that includes the phone's own sound with the picture, what the iPhone plays rather than anything the Mac's microphone hears.

What happens if the phone goes away

If the cable is pulled, or another phone is opened in Yado, the recording stops and the file is finished with whatever was written. A card then reports the recording saved, and the file is on the Desktop. An error on the way out is not treated as proof the movie is bad, so Yado keeps what was written. If the movie cannot be finished at all, the card says Recording Did Not Start, which is the title that card shares with a failed start, and you should look at the Desktop before trusting it.

While a recording runs, Quit and closing the last window are held. A card reads Stop the Recording First and says to stop it before quitting Yado, so a long take is not cut off by habit. The recording itself is not a write to the phone, so it does not block switching phones, and switching is exactly what ends it.

When it does not work

The iPhone is not in QuickTime's Camera list. Unlock the phone, accept the trust prompt if it asks, and replug the cable. Try another cable or port, then follow iPhone not showing up on Mac.

Yado says "Recording did not start". The card gives the reason. Unlock the iPhone and try again means no capture device turned up within about eight seconds, usually a locked phone or one that does not trust this Mac. Check that the iPhone is unlocked and cabled, then try again covers a device that opened but could not be written. A card saying two iPhones of the same name are on the cable means Yado finds the phone by the name Finder shows, so with two phones of one name it refuses to guess and asks you to unplug one.

Camera access is denied. The card says reading the iPhone's screen needs the Camera access QuickTime uses. Open System Settings, Privacy & Security, Camera and turn it on for Yado or QuickTime, whichever you are using.

The file is big. Yado's code sets no length limit, so a long take uses as much Mac disk space as it needs. Check the free space before a long recording.

FAQ

Does the recording include sound?

Yes. QuickTime records audio, and Apple's page lists AAC for High and Linear PCM for Maximum. Yado records the phone's own sound along with the screen, since the capture device carries both, but not your voice from the Mac's microphone. The iPhone's own recorder can add the microphone if you turn it on before starting.

Can I record over Wi-Fi?

No. The Mac sees the phone's screen as a capture device only over the cable, so QuickTime and Yado both need USB. The iPhone's own Control Center recorder needs no Mac at all.

Can I take a still instead?

Yes. Yado's Take Screenshot saves a framed picture from the same channel, and take an iPhone screenshot on Mac covers it and the other routes.

Where does the file go, and can I change it?

Yado saves to the Desktop under the name described above and has no setting for another folder. Move it from there once it is saved. QuickTime asks for a name and place when you save.

Yado manages your iPhone from the Mac over a cable: photos, duplicates, apps, files and local backups.

Download for Mac

Keep reading

  • Your iPhoneiPhone manager for Mac: Apple tools and iTunes alternativesOctober 27, 2026 · 8 min read
  • Your iPhoneWhat to do before selling or trading in an iPhoneOctober 31, 2026 · 8 min read
  • Your iPhoneHow to remove a profile from your iPhoneOctober 28, 2026 · 8 min read

Yado · 宿

Clean up your iPhone from your Mac

Product Download Features Blog Buy
Support Help FAQ Releases Privacy Terms
Connect Email X GitHub
More Apps Mole 鼹 Pake 殼 MiaoYan 語 Kaku 書